sorabji.com > foundcrap > found floppies > specdisk


������������������������ SECTION 07464

 

������������������������ VINYL SIDING

This section includes several types of super polymer and solid vinyl siding and soffit as manufactured by Heartland Building Products, Inc.

 

Commercial sidings began as wood or wood fiber composition.� Next came steel siding, then aluminum, and then regular vinyl siding.� Today, there is a new generation of building product in this category -- Heartland Super Polymer Vinyl Siding -- which is leading the industry into the 21st century.�

 

These products are marketed through independent wholesale distributors and are manufactured exclusively by Heartland Building Products, 300 Park Place, Booneville, Mississippi 38829.� Call the Architectural and Project Department at 1-800-328-7864 for design assistance.

 

PART 1� GENERAL

 

1.1 SECTION INCLUDES

 

��� A.� Super polymer and solid vinyl siding.

 

��� B.� Super polymer and solid vinyl soffits.

 

��� C.� Vinyl accessories and trim.

 

1.2 RELATED SECTIONS

 

��� A.� Section 06112 - Framing and Sheathing.

 

��� B.� Section 07900 - Joint Sealers.

 

1.3 REFERENCES

 

��� A.� ASTM D 256 -- Standard Test Methods for Determining the Pendulum Impact Resistance of Notched Specimens of Plastics.

 

��� B.� ASTM D 635 -- Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position.

 

��� C.� ASTM D 638 -- Standard Test Method for Tensile Properties of Plastics.

 

��� D.� ASTM D 648 -- Standard Test Method for Deflection Temperature of Plastics Under Flexural Load.

 

��� E.� ASTM D 696 -- Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30 Degrees C and 30 Degrees C.

 

��� F.� ASTM D 790 -- Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials.

 

��� G.� ASTM D 792 -- Standard test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement.

 

��� H.� ASTM D 1784 -- Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds.

 

��� I.� ASTM D 1929 -- Standard test Method for Ignition Properties of Plastic.

 

��� J.� ASTM D 2240 -- Standard test Method for Rubber Property--Durometer Hardness.

 

��� K.� ASTM D 3679 -- Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding.

 

��� L.� ASTM E 119 -- Standard Test Methods for Fire Tests of Building Construction and Materials.

 

��� M.� Rigid Vinyl Siding Application Manual -- Vinyl Siding Institute of the Plastics Industry.

 

1.4 PERFORMANCE REQUIREMENTS

 

��� A.� Fire Resistance:� Provide vinyl siding, soffit, and accessories that meet or exceed the following ratings:

������� 1.� Flame spread 15, fuel contributed 0, smoke developed 390, when tested in accordance with ASTM E 84.

������� 2.� Average time of burning:� Less than 5 seconds, per ASTM D 635.

������� 3.� Average extent of burning:� Less than 25 mm, per ASTM D 635.

������� 4.� Flash ignition temperature:� 807 degrees F, per ASTM D 1929.

������� 5.� Self ignition temperature:� 878 degrees F, per ASTM D 1929.

������� 6.� One hour rated wall assembly, tested per ASTM E 119.

 

1.5 SUBMITTALS

 

��� A.� Submit under provisions of Section 01300.

 

��� B.� Product Data:� Submit manufacturer's standard product information, including detailed installation instructions.

 

��� C.� Selection Samples:� Submit manufacturer's standard color chips for selection of color and texture.

 

��� D.� Verification Samples:� Submit 3 samples of siding products in colors specified, each not less than 12 inches in length.

 

1.6 QUALITY ASSURANCE

 

��� A.� Certification:� Provide manufacturer's certification that vinyl siding products comply with specified requirements.

 

1.7 DELIVERY, STORAGE, AND HANDLING

 

��� A.� Deliver siding packed two squares to the box, with each box color coded for product line and marked with lot number, color, and siding style.

 

��� B.� Store siding on level, elevated platform that is kept clean and dry.� Cover siding only with clear plastic.

 

1.8 WARRANTY

 

��� A.� Within 30 days of completion of the work of this section, deliver manufacturer's written "Lifetime Plus" or "Lifetime" transferable limited warranty.

 

 

PART 2� PRODUCTS

 

2.1 MANUFACTURER

 

��� A.� Provide vinyl siding products manufactured by Heartland Building Products, Inc.;� Booneville Mississippi 38829.� Telephone:�� 800-HEART-01.

������� 1.� Substitutions are not acceptable.

 

2.2 MATERIALS

 

��� A.� Provide products made of post formed extruded PVC using the exclusive Heartland Super Polymer Multi-Lite 4 or Solid Vinyl formulation.

 

��� B.� Polyvinyl Chloride (PVC):� Provide siding materials made of compounds meeting the requirements of ASTM D 3679 for compound class number 2 and 3 with the following test results:

������� 1.� Cell classification, per ASTM D 1784:� 11345.

������� 2.� Izod impact, per ASTM D 256:� 20.0 ft.lbs/in. notch at 23 deg. C;� 3.8 ft.lbs/in. notch at 0 deg. C.

������� 3.� Specific gravity, per ASTM D 792:� 1.452.

������� 4.� Hardness-Durometer, per ASTM D 2240:� 72+/-3.

������� 5.� Tensile strength, per ASTM D 638:� 6,181 psi.

������� 6.� Modulus of elasticity, per ASTM D 790:� 360,514.

������� 7.� Heat deflection temperature, per ASTM D 648:� 159 degrees F at 264 psi (deg.F).

������� 8.� Coefficient of linear expansion, per ASTM D 696:� 3.12 x 10-5 in./in.(degree F).

������� 9.� Warp, per ASTM D 3679:� less than 1/8 inch.

������� 10. Weatherability, per ASTM D 3679:� No cracking, peeling, chipping, or surface defects.

������� 11. Surface distortion, per ASTM D 3679:� None.

 

2.3 SIDING

Retain only the particular siding type required for the project from those listed below;� delete other types.

 

Be certain to edit description of siding type retained to delete options not required.� For example, three color options are included under each siding type.�

��� A.� Natural Blend:� A Wood Dimensional Solid Vinyl Siding Formulation,� Enhanced Weathering Characteristics, Low Luster Finish, Multi-Tone Stained Woodgrain Impression.

������� 1.� Style:� Double 4; 8 inch width; 12 feet, 6 inches length.

������� 2.� Thickness:� Nominal 0.044 in. (+/- 0.004 in.).

������� 3.� Color:� As selected by Architect from manufacturer's standards.

������� 4.� Color:� As indicated on drawings.

������� 5.� Color:� _________________.

 

��� B.� Manor:� Super Polymer Multi-Life 4 Formulation, Weather Barrier Shield, Traditional Woodgrain and Low Gloss Natural Patina Finish.

������� 1.� Style:� Double 5 Dutch Lap.

������� 2.� Thickness:� Nominal 0.044 in. (+/- 0.002 in.).

������� 3.� Width:� 10 inches.

������� 4.� Length:� 12 feet.

������� 5.� Color:� As selected by Architect from manufacturer's standards.

������� 6.� Color:� As indicated on drawings.

������� 7.� Color:� _________________.

 

��� C.� Traditional:� Super Polymer Multi-Life 4 Formulation, Weather Barrier Shield, Traditional Woodgrain Impression and Low Gloss Natural Patina Finish.

������� 1.� Style:� Double 4;� 8 inch width;� 12 feet, 6 inches length.

������� 2.� Style:� Double 5;� 10 inch width;� 12 feet length.

������� 3.� Style:� Single 8;� 8 inch width;� 12 feet, 6 inches length.

������� 4.� Thickness:� Nominal 0.044 in. (+/- 0.002 in.).

������� 5.� Color:� As selected by Architect from manufacturer's standards.

������� 6.� Color:� As indicated on drawings.

������� 7.� Color:� _________________.

 

��� D.� Springfield:� Super Polymer Multi-Life 4 Formulation, Weather Barrier Shield, Traditional Woodgrain Impression and Low Gloss Natural Patina Finish.

������� 1.� Style:� Double 4 Dutch Lap.

������� 2.� Thickness:� Nominal 0.042 in. (+/- 0.004 in.).

������� 3.� Width:� 8 inches.

������� 4.� Length:� 12 feet, 6 inches.

������� 5.� Color:� As selected by Architect from manufacturer's standards.

������� 6.� Color:� As indicated on drawings.

������� 7.� Color:� _________________.

 

��� E.� Imperial Cascade:� Super Polymer Multi-Life 4 Formulation, Weather Barrier Shield, Brushed Grain Impression and Low Gloss Natural Patina Finish.

������� 1.� Style:� Single 6-1/2.

������� 2.� Thickness:� Nominal 0.044 in. (+/- 0.002 in.).

������� 3.� Width:� 6-1/2 inches.

������� 4.� Length:� 12 feet, 4 inches.

������� 5.� Color:� As selected by Architect from manufacturer's standards.

������� 6.� Color:� As indicated on drawings.

������� 7.� Color:� _________________.

 

��� F.� Triple Eagle:� Super Polymer Multi-Life 4 Formulation, Weather Barrier Shield, Pebble Impression and Low Gloss Natural Patina Finish.

������� 1.� Style:� Triple 3.

������� 2.� Thickness:� Nominal 0.042 in. (+/- 0.002 in.).

������� 3.� Width:� 9 inches.

������� 4.� Length:� 12 feet, 1 inch.

������� 5.� Color:� As selected by Architect from manufacturer's standards.

������� 6.� Color:� As indicated on drawings.

������� 7.� Color:� _________________.

 

��� G.� Satin Ensemble:� Super Polymer Multi-Life 4 Formulation, Weather Barrier Shield, Satin Smooth Impression, and Low Gloss Natural Patina Finish.

������� 1.� Style:� Double 4; 8 inch width; 12 feet, 6 inches length.

������� 2.� Style:� Double 5; 10 inch width; 12 feet length.

������� 3.� Style:� Double 4 Dutch Lap;� 8 inches width; 12 feet, six inches length.

������� 4.� Style:� Triple 3;� 9 inch width; 12 feet, 1 inch length.

������� 5.� Thickness:� Nominal 0.042 inch (+/- 0.004 in.).

������� 6.� Color:� As selected by Architect from manufacturer's standards.

������� 7.� Color:� As indicated on drawings.

������� 8.� Color:� _________________.

 

��� H.� Heart Tech:� Super Polymer Formulation and SPX- 2000 UV Blocker, Woodgrain Impression and Low Gloss Natural Patina Finish.

������� 1.� Style:� Double 4; 8 inches width; 12 feet, 6 inches length.

������� 2.� Style:� Double 5;� 10 inches width;� 12 feet length.

������� 3.� Style:� Double 4 Dutch Lap;� 8 inches width;� 12 feet, 6 inches length.

������� 4.� Style:� Double 5 Dutch Lap;� 10 inches width;� 12 feet length.

������� 5.� Thickness:� Nominal 0.042 in. (+/- 0.004 in.).

������� 6.� Color:� As selected by Architect from manufacturer's standards.

������� 7.� Color:� As indicated on drawings.

������� 8.� Color:� _________________.

 

��� I.� Premium Plus:� Solid Vinyl Formulation, Soft Mill Grain Impression and Low Luster Finish.

������� 1.� Style:� Double 4;� 8 inches width;� 12 feet, 6 inches length.

������� 2.� Style:� Double 5;� 10 inches width;� 12 feet length.

������� 3.� Style:� Double 4 Dutch Lap;� 8 inches width;� 12 feet, 6 inches length.

������� 4.� Thickness:� Nominal 0.042 in. (+/- 0.004 in.).

������� 5.� Color:� As selected by Architect from manufacturer's standards.

������� 6.� Color:� As indicated on drawings.

������� 7.� Color:� _________________.

 

��� J.� Premium:� Grayback Solid Vinyl Formulation, Soft Mill Grain Impression and Low Luster Finish.

������� 1.� Style:� Double 4;� 8 inches width;� 12 feet, 6 inches length.

������� 2.� Style:� Double 5;� 10 inches width;� 12 feet length.

������� 3.� Style:� Double 4 Dutch Lap;� 8 inches width;� 12 feet, 6 inches length.

������� 4.� Thickness:� Nominal 0.040 in. (+/- 0.004 in.).

������� 5.� Color:� As selected by Architect from manufacturer's standards.

������� 6.� Color:� As indicated on drawings.

������� 7.� Color:� _________________.

 

��� K.� Lite Shake:� Hybrid Polymer-Polypropylene Siding Formulation, Anti-Weathering and UV Characteristics, Low Gloss Finish, Stained Wood Shake Impression.

������� 1.� Style:� Shake siding panels; 10 inches width;� 48 inch length (net coverage).

������� 2.� Thickness:� Nominal 0.080 inch.

������� 3.� Color:� White.

������� 4.� Color:� Gray.

������� 5.� Color:� Cedar brown.

������� 6.� Color:� As indicated on drawings.

������� 7.� Color:� _________________.

 

2.4 SOFFITS

Retain soffit type required for project from those listed below;� delete remaining types.

 

Be certain to edit description of soffit type retained to delete all options not required for project.� For example, three color options are included under each soffit type.

��� A.� Extra Strength Soffit (Vertical Paneling):� Super Polymer Multi-Life 4 Formulation, Weather Barrier Shield, Traditional Woodgrain and Low Gloss Natural Patina Finish.

������� 1.� Style:� Double 6 Aerated (Lanced).

������� 2.� Style:� Double 6 Non-Aerated.

������� 3.� Thickness:� Nominal� 0.050 in. (+/- 0.002 in.).

������� 4.� Width:� 12 inches.

������� 5.� Length:� 12 feet.

������� 6.� Color:� As selected by Architect from manufacturer's standards.

������� 7.� Color:� As indicated on drawings.

������� 8.� Color:� _________________.

 

��� B.� Heart Tech Soffit (Vertical Paneling):� Super Polymer Formulation, SPX-2000 UV Blocker, Woodgrain Impression and Low Gloss Natural Patina Finish.

������� 1.� Style:� Double 6 Aerated (Lanced).

������� 2.� Style:� Double 6 Non-Aerated.

������� 3.� Thickness:� Nominal� 0.048 in. (+/- 0.004 in.).

������� 4.� Width:� 12 inches.

������� 5.� Length:� 12 feet.

������� 6.� Color:� As selected by Architect from manufacturer's standards.

������� 7.� Color:� As indicated on drawings.

������� 8.� Color:� _________________.

 

��� C.� Standard Soffit (Vertical Paneling):� Solid Vinyl Formulation and Pebble Impression Finish.

������� 1.� Style:� Double 6 Aerated (Lanced).

������� 2.� Style:� Double 6 Non-Aerated.

������� 3.� Thickness:� Nominal� 0.048 in. (+/- 0.004 in.).

������� 4.� Width:� 12 inches.

������� 5.� Length:� 12 feet.

������� 6.� Color:� As selected by Architect from manufacturer's standards.

������� 7.� Color:� As indicated on drawings.

������� 8.� Color:� _________________.

 

��� D.� Premium Plus Soffit:� Solid Vinyl Formulation and Matte Impression.

������� 1.� Style:� Triple 4 Center-Vented.

������� 2.� Thickness:� Nominal� 0.040 in. (+/- 0.004 in.).

������� 3.� Width:� 12 inches.

������� 4.� Length:� 12 feet.

������� 5.� Color:� As selected by Architect from manufacturer's standards.

������� 6.� Color:� As indicated on drawings.

������� 7.� Color:� _________________.

 

��� E.� Natural Blend Soffit (Vertical Paneling):� A Wood Dimensional Solid Vinyl Formulation with Enhanced Weathering Characteristics, Low Luster Finish, Multi-Tone Stained Woodgrain Impression.

������� 1.� Style:� Double 5 Aerated (Lanced).

������� 2.� Style:� Double 5 Non-Aerated.

������� 3.� Thickness:� Nominal� 0.042 in. (+/- 0.002 in.).

������� 4.� Width:� 10 inches.

������� 5.� Length:� 12 feet.

������� 6.� Color:� As selected by Architect from manufacturer's standards.

������� 7.� Color:� As indicated on drawings.

������� 8.� Color:� _________________.

 

2.5 ACCESSORIES

 

��� A.� Trim:� Provide manufacturer's standard trim and finishing accessories with properties and in colors comparable to vinyl siding products specified.

 

��� B.� Fasteners:� Corrosion-resistant fasteners as recommended by manufacturer of vinyl siding products.

 

 

PART 3� EXECUTION

 

3.1 EXAMINATION

 

��� A.� Prior to commencing work of this section, verify governing dimensions of building.

 

��� B.� Examine substrate for flaws and defects.� Do not commence work of this section until unsatisfactory substrate conditions have been corrected.

 

3.2 INSTALLATION

 

��� A.� Install siding, soffits and accessories in strict accordance with "Rigid Vinyl Siding Application Manual."

 

��� B.� Upon completion of installation, visually inspect for defective installation procedures or manufacturing defects.� Replace and repair components as necessary.

 

3.3 CLEANING

 

��� A.� Upon completion of installation, clean siding and soffits to remove all foreign debris and soiling.� Remove packaging and waste material from project site.

 

 

����������������������� Back to SPECDISK Table of Contents


sorabji.com > foundcrap > found floppies > specdisk